News:

Subscribe for Updates:

Enter your email below to receive email updates

RSS Feed:

Press Releases

 
Feb 13, 2007
Further Promising Drill Hole Results from Kay Tanda
EDMONTON, Alberta; February 13, 2007 - Mindoro Resources Ltd. (TSXV: MIO; Frankfurt: WKN 906167) today reported additional results from a further thirteen reverse circulation drill (RC) holes and partial results of two core (DH) holes from the Kay Tanda epithermal gold-silver prospect, located in the Archangel Project, the Philippines. Drill highlights include 58 meters of 1.53 grams per tonne (g/t) gold from surface, including 24 meters of 3.05 g/t gold, in PLRC-30 [silver not yet received]; 28 meters of 3.43 g/t gold from surface, including 8 meters of 10.05 g/t gold in PLRC-33; and 124 meters of 0.72 g/t gold, including 12.3 meters of 2.58 g/t gold in KTDH-07. With one reverse circulation rig and two core rig now drilling Kay Tanda, plus metallurgical test work underway in Australia, the company anticipates completing a National Instrument 43-101 resource estimate early in the second quarter of 2007.

The RC and core infill holes are continuing to confirm internal continuity of the aerially extensive, near-surface low-grade, blanket-like form of gold-silver mineralization. To date, drill spacing has been mostly on 50 meter centers. Drill spacing is being closed in to approximately 50 meters by 25 meters in several areas to give a greater degree of confidence in internal continuity.

Core hole KTDH-08 was an angle hole drilled grid west to target the deeper, high-grade mineralization intersected in KTDH-04 (reported in a release dated November 14, 2006). It intersected eight zones of low-grade gold-silver mineralization above the 0.3 g/t gold cut-off [see table below], but did not intersect the high grade seen in KTDH-04, possibly due to offsetting along heavy faulting encountered in this hole.

SUMMARY OF LATEST RESULTS
The table below summarizes results of the latest drilling. (Based on a cut-off grade of 0.3 g/t gold)

KTRC-70

(RC Hole)

 

 

 

 

 

From

To

Sample Length (m)

Au g/t

Ag g/t

10050N : 9950E

 

 

Direction: 320°

 

Incl: -60°

 

6

8

2

0.48

1.10

 

30

58

28

0.59

2.46

including

32

36

4

1.06

5.53

 

66

70

4

0.40

0.80

 

78

80

2

0.83

1.15

 

126

128

2

0.41

<0.5

KTRC 71

(RC Hole)

 

 

 

 

10050N : 9950E

 

 

Direction: 140°

 

Incl: -70°

 

12.0

48.0

36

1.47

8.63

including

14.0

26.0

12

2.57

20.62

& including

32.0

38.0

6

2.08

3.23

 

66.0

68.0

2

0.33

0.80

 

88.0

90.0

2

0.30

<0.5

KTRC 72

(RC Hole)

 

 

 

 

10050N : 9900E

 

 

Direction: 140°

 

Incl: -60°

 

0

8

8

0.57

2.59

 

56

58

2

0.58

0.95

 

110

112

2

6.71

8.50

KTRC 73

(RC Hole)

 

 

 

 

10050N : 10000E

 

 

Direction: 140°

 

Incl: -70°

 

22

30

8

1.05

14.64

 

50

60

10

0.49

2.24

KTRC 74

(RC Hole)

 

 

 

 

9750N : 10150E

 

 

Direction: 320

 

Incl: -70°

 

4

10

6

0.36

0.77

 

28

78

50

0.39

2.73

 

108

128

20

0.54

0.76

including

118

120

2

2.51

2.51

KTRC 75

(RC Hole)

 

 

 

 

9750N : 9975E

 

 

Direction: 140

 

Incl: -80°

 

10

12

2

0.30

1.60

 

46

50

4

0.53

2.10

 

76

86

10

0.50

0.60

including

76

78

2

1.11

0.55

& including

84

86

2

1.26

0.95

 

96

112

16

0.36

0.50

including

96

102

6

0.70

0.50

KTRC 76

(RC Hole)

 

 

 

 

9750N : 10200E

 

 

Direction: 320

 

Incl: -70°

 

48

60

12

0.40

0.52

KTRC 77

(RC Hole)

 

 

 

 

9900N : 10000E

 

 

Direction: 320°

 

Incl: -80°

 

36

38

2

0.35

2.00

 

54

102

48

0.48

1.28

including

90

98

8

1.26

1.31

 

116

118

2

0.70

<0.5

KTRC 78

(RC Hole)

 

 

 

 

9900N : 10100E

 

 

Direction: 320°

 

Incl: -60°

 

2

46

44

0.31

1.55

 

90

116

26

0.37

1.23

KTRC 79

(RC Hole)

 

 

 

 

9900N : 9850E

 

 

Direction: 140°

 

Incl: -70°

 

54

68

14

0.33

N/R

PLRC 30

(RC Hole)

 

 

 

 

9350N : 9575E

 

 

Direction: 140°

 

Incl: -70°

 

4

62

58

1.53

N/R

including

38

62

24

3.05

N/R

PLRC 31

(RC Hole)

 

 

 

 

9350N : 9625E

 

 

Direction: 140°

 

Incl: -60°

 

6

12

6

0.41

N/R

 

32

36

4

0.58

N/R

 

58

60

2

0.45

N/R

 

66

68

2

1.72

N/R

PLRC 33

(RC Hole)

 

 

 

 

9400N : 9625E

 

 

Direction: 320°

 

Incl: -80°

 

10

38

28

3.43

N/R

including

22

30

8

10.05

N/R

 

64

72

8

1.30

N/R

KTDH 07

(Core Hole)

 

 

 

 

9750N: 10000E

 

 

Direction: 140°

 

Incl: -55°

 

2

3

1

0.69

33.40

 

17

18

1

0.31

0.50

 

21

40

19

0.39

2.85

Including

26

27

1

1.22

1.15

 

49

173

124

0.72

1.58

Including

129

141.3

12.3

2.58

1.68

& Including

152.3

157.3

5

1.31

0.74

KTDH-08

(Core Hole)

 

 

 

 

10087N :10000E

 

 

Direction: 320°

 

Incl: -51°

 

33.5

43.5

10

0.87

5.41

 

59

61

2

0.33

0.90

 

74

83

9

0.48

1.22

 

90

91

1

0.35

0.80

 

110

121

11

0.89

0.70

including

110

113

3

1.83

1.15

 

144

146

2

4.14

0.50

 

164

166

2

3.76

0.66

 

187

202

15

0.46

0.51

including

197

202

5

1.04

0.54

N/R: not yet received

 

 

 

 

Core hole KTDH-07 assay results were reported down to 141m in the Jan. 31 release.


A map accompanying this release and posted on Mindoro's website ("Kay Tanda Gold g/t X meters"), shows the location of all drill holes to date and distribution of gold values in grams per tonne (g/t) times intercept length in meters for each hole. Using a cut-off of 0.3 g/t gold, mineralization intercepts for each drill hole are summed and plotted in contour form. Mindoro considers the contoured areas defined by numbers greater than 15 (g/t gold x length of intercept) to be of particular interest. This map format illustrates the distribution of mineralization and provides information on mineralization centers, structural controls, as well as mineralization trends.


Click to view a PDF version of the map


PLANS
Drilling will continue to extend and evaluate the epithermal gold-silver mineralization at Kay Tanda; especially targeting and extending the high-grade mineralization encountered in recent holes, and testing areas of enhanced chargeability. A number of the RC holes will be deepened with the core rig to test elevations below 150 meters. Some core holes will also be continued to greater depths where alteration and mineralization suggest proximity to porphyry mineralization. Two metallurgical samples have been sent to Australia for testing and a third sample is being collected. This work will be followed by a National Instrument 43-101 resource estimate and a scoping study.

ABOUT KAY TANDA
Low sulphidation epithermal gold-silver mineralization at Kay Tanda is associated with extensive and intense hydrothermal breccias, quartz stockworks, with accompanying base metal sulphides, reflected by an induced polarization chargeability anomaly that is about 1.5 kilometers by 1.4 kilometers in extent. Only a relatively small part of the chargeability anomaly has been drill-tested to date; over about one kilometer by 300 to 600 meters at Kay Tanda. This is interpreted as part of a much larger mineral system consisting of epithermal gold-silver and base-metal mineralization telescoped into an underlying porphyry copper-gold system.

Mindoro has completed over 100 reverse circulation (RC) and eight core drill holes at Kay Tanda. Almost all holes have encountered near-surface, generally flat-lying to gently-dipping blanket-like low-grade mineralization, which is partially to strongly oxidized to depths of 40 to 60 meters and non-oxide below this. Drilling, especially at deeper levels, has encountered at least four steeper-dipping and much higher-grade zones, with bonanza grades to 100 g/t gold and over 1,000 g/t silver, in places, which are interpreted as structurally controlled upflow, or "feeder" zones. Further drilling and structural studies are in progress to determine the nature and controls of the high-grade zones. Mineralization is thought to be related to swarms of hydrothermal breccias, and prospect-scale quartz stockworking, with the high-grade occurring preferentially at elevations below 150 meters (ASL) within a boiling zone. Few holes have penetrated to this depth to date. Such upflow zones can be associated with bonanza mineralization and constitute some of the world's best epithermal gold-silver deposits.

Programs are carried out under the supervision of Tony Climie, P.Geol., who is a qualified person as defined by National Instrument 43-101. Normal Quality Control and Quality Assurance procedures are being carried out, using a system of duplicate, standard and blank samples.

ABOUT MINDORO
Mindoro is a Tier 1 Issuer trading on the TSX Venture Exchange (MIO) and the Frankfurt Stock Exchange (WKN 906167). In addition to the resource delineation being carried out at Kay Tanda, the company has identified 22 porphyry copper-gold prospects and a nickel laterite prospect in the Philippines and has an aggressive strategy of drilling multiple targets in 2007.

FOR FURTHER INFORMATION, CONTACT:

HEAD OFFICE

Penny Gould
Executive Vice President
Phone: 780.413.8187
E-mail: penny@mindoro.com
Website: www.mindoro.com

INVESTOR RELATIONS-CANADA
Trent Dahl
Ascenta Capital Partners Inc.
Phone: 604.628.5800
Toll Free: 1.866.684.4209 ext. 228
E-mail: info@mindoro.com

INVESTOR RELATIONS-EUROPE
Richard Mayr
Argentuminvest GmbH
Phone: +49.9421.785250
Fax: +49.9421.785255
E-mail: info@argentuminvest.com

The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.

This release may contain forward-looking statements including management's assessments of future plans and operations, and expectations of future production. These statements are based on current expectations that involve a number of risks and uncertainties, which could cause actual results to differ materially from those anticipated. These risks include, but are not limited to, the risks associated with the mining and exploration industry (e.g. operational risks in development, exploration and production; delays or changes in plans with respect to exploration or development projects or capital expenditures; the uncertainty of reserve estimates; the uncertainty of estimates and projections relating to production). The assumptions used in the preparation of such statements, although considered reasonable at the time of preparation, may prove to be imprecise and, as such, undue reliance should not be placed on forward-looking statements.


View News Release in PDF Format:

 
 

You can view the Next Press Releases item: Wed Feb 21, 2007, Further Drill Hole Results from Kay Tanda Give High Gold and Silver Values

You can view the Previous Press Releases item: Wed Jan 31, 2007, Infill Drill Holes Establishing Internal Continuity of Mineralization at Kay Tanda

You can return to the main Press Releases page, or press the Back button on your browser.